STC Electronic: Detailed analysis of hard disk SATA interface

Industry: Consumer Electronics

SATA is one of the mainstream hard disk interfaces. At present, SATA2.0 and SATA3.0 are relatively common on the market. Although the current popularity of SATA’s interface is obviously not comparable to that before, it still occupies the mainstream interface solution.

HK (PRUnderground) May 19th, 2021

(Press release by STC Electronic)

SATA is one of the mainstream hard disk interfaces. At present, SATA2.0 and SATA3.0 are relatively common on the market. Although the current popularity of SATA’s interface is obviously not comparable to that before, it still occupies the mainstream interface solution.

https://www.stc-cable.com/90-degree-down-angle-sata-cable-with-latch-for-dvd-rom-hdd-ssd.html

1> The meaning of SATA
The full name of SATA is SerialAdvanced Technology Attachment (serial advanced technology attachment, a serial hardware drive interface based on industry standards), which is a hard disk interface specification jointly proposed by Intel, IBM, Dell, APT, Maxtor and Seagate.

2> Classification of hard disk interface
The two types that we mainly introduce here have some “ages”. The SATA interface has a simple structure, supports hot plugging, fast transmission speed, and high execution efficiency. The hard disk that uses SATA (Serial ATA) interface is also called serial hard disk, which is now the mainstream hard disk interface. At present, most SSDs are serial hard drives with SATA interface. Corresponding to the serial hard disk is the hard disk using the PATA (Parallel Advanced Technology Attachment) interface. PATA hard disks are called parallel ATA hard disks. They use a four-core power cord and an 80-core IDE data cable to connect to the motherboard to transmit data in parallel and in series (serial). Due to the limitation of parallel transmission, the transmission rate is relatively low, and PATA hard drives do not need to be installed.

https://www.stc-cable.com/90-degree-down-angle-sata-cable-with-latch-for-dvd-rom-hdd-ssd.html

3> Advantages of SATA
(1) Stronger error correction capability Serial ATA adopts serial connection mode. Serial ATA bus uses embedded clock signal and has stronger error correction capability. Compared with the past, its biggest difference is that it can transmit instructions ( Not only data) to check, if errors are found, they will be automatically corrected, which greatly improves the reliability of data transmission.

(2) The data transfer rate defined by the higher-start mainstream specification Serial ATA 1.0 can reach 150MB/s, which is higher than the highest data transfer rate of 133MB/s that parallel ATA (ATA/133) can achieve; in Serial ATA 2.0 The data transfer rate reaches 300MB/s, while Serial ATA 3.0 has reached a high data transfer rate of 600MB/s. SATA specifications retain a variety of backward compatibility methods, and there is no compatibility problem in use.

(3) With hot-swappable function, this function can be used to construct a disk array more conveniently. Since the serial port data cable only uses a four-pin structure, it is more convenient to install compared to the parallel port, which is more conducive to reducing the cables in the chassis and beneficial to heat dissipation.

https://www.stc-cable.com/sata-power-cable-for-hdd-ssd.html

4> The difference between SATA 2 and SATA 3
SATA 3 transfer rate can reach 6Gb/s, while the transfer rate of SATA 2 interface is 3Gb/s. In theory, the SATA 3 interface is twice that of SATA 2.

https://www.stc-cable.com/intel-nuc-ssd-internal-22-pin-sata-replacement-cable-harness.html

SATA 2 and SATA 3 motherboards have basically the same appearance of hard disk interface, but many low-end motherboards use SATA 2 and SATA 3 dual interface hybrid mode, such as AMD platform A75, Intel platform B75, H81, B85 motherboards are SATA 2SATA 3. Dual-interface hybrid mode, while some mid-to-high-end motherboards, such as A88, H87, Z87 and other motherboards, all have SATA 3 interfaces

https://www.stc-cable.com/sata-22pin-to-sata7p-4pin-power-cable-for-hdd.html

Left Angle SATA cable for DVD-ROM HDD SSD

90 Degree down Angle SATA cable with Latch for DVD-ROM HDD SSD

Slim SATA 13 pin(7P+6P) to 7pin + Power cable

SATA 22Pin To SATA7P & 4pin Power Cable for HDD

eSATAp to SATA 22Pin Data Hard Disk Adapter Cable

SATA Power Cable for HDD SSD

About STC Electronic (Hong kong) Co., Limited

Leadership
STC-CABLE is an industry leading manufacturer of high performance cabling and connectivity solutions. Founded in 2008, STC provides end-to-end connectivity solutions serving a variety of markets–including corporate, digital signage, education, healthcare, home theater, and hospitality.

As a professional cable assembly factory, STC brings a complete portfolio of products and solutions including USB 2.0 Cables, USB 3.0 Cables, USB C Cables, Drive Cables, Network Cables & Adapters, Audio & Video Cables, Serial & Parallel Cables, Audio-Video Products, Computer power Cables internal and so on.

Leo Zhang
Sales Manager
hevenz@stcforcable.com
Tel: (86) 134 2285 3610
www.stc-cable.com
STC Electronic (HongKong) Co,.Limite

Print Friendly, PDF & Email

Press Contact

Name
Leo Zhang
Phone
+8613422853610
Email
Contact Us
Website
https://www.stc-cable.com

Image Gallery

Video